ATC New LCD Remote Shock/Vibrate Dog Training Collar -2 Dog

These collars are great!! You can "alert" each dog individually and switch between dogs easily and quickly. Assembly was simple and quick right out of the box. I had almost instant results with both of my min pins who had decided not to listen when outside unleashed. I love the fact that you can vibrate the collar instead of shocking-and you can change the intensity. Or you can just use a beep to get the dogs attention. Both of my dogs respond to the beep to get their attention and if needed respond well to the vibration. Its nice to not have to use the static "shock" unless REALLY necessary. Because of the ability to change between intensitys and individualize it for each dog, these collars could be used on any size dog. The shipping was very fast and customer service was excellent!! I would highly recommend these collars to anyone who wants to aid in training a couple of stubborn pooches!!

The price was great the product was not. it is a two collar system but i only use one collar for frear of shocking the wrong dog! after only using it for a week the battery in the remote died. it took forever to get the right size and they were expensive. now the remote itself does not work even after changing the batteries.

Buy ATC New LCD Remote Shock/Vibrate Dog Training Collar -2 Dog Now

This thing chews through batteries way too fast. The batteries in the collar have to be changed almost daily. The specialized batteries in the remote die quickly as well and are more difficult to replace.

Read Best Reviews of ATC New LCD Remote Shock/Vibrate Dog Training Collar -2 Dog Here

pros:

1. The range on these is good.

2. The collars take standard AAA which is nice.

3. The shock and vibration are adjustable. One of my dogs a mild vibration is plenty and the other needs half power shocks from time to time so he doesn't think he can run free chasing cars. Anything less he just shrugs and goes anyway obviously deciding that freedom is worth the price. lol.

4. These are pretty sturdy and both collars still work after getting some decent use.

5. Great price when I got them.

6. You can vibrate, shock, or beep each dog seperately and settings for levels are stored for each seperately.

Cons:

1. Remote uses stupid batteries instead of something standard. (pro tip for this later)

2. The build quality is less than stellar. One collar is louder than the other for example.

3. When batteries run low the collar uses the same beep noise as the manual beep. This means you can not train the dogs that the beep is a warning or even a "come here" command. If you do and the batteries run low the poor dog will be stressed out as his collar continually 'warns' him or commands him to do something.

4. It is a bit of a pain to remove and readd batteries to the collar and then press the button on the remote right away. Not a huge deal but not great.

5. Because there is no dedicated button for each mode or for each dog you have to be very careful to look at the remote and ensure you have the right dog and the right mode or you may shock dog one when you mean to vibrate dog two. Then you feel bad and the dogs are confused.

6. The remote goes to sleep to save batteries and you have to hold the remote button for a second to turn it back on. This combined with the time to look at the screen to make sure you are on the right dog and right mode means you miss the training opportunity a lot.

tips:

1. Use low discharge rechargable AAA batteries for the collars and keep one set charging while you use another. These collars eat through batteries fast if you leave them on long and a fresh set is good.

2. If possible change the person using the remote so the dogs to not associate training with a single person and only behave when that person is around.

3. Start with low settings such as 10 on the shock and only move it up if needed. The collars shock harder when batteries are fresh and some dogs will ignore low settings especially on low batteries.

4. Use vibrate before shock and eventually your dog will associate the vibrate with the warning and shocks will rarely be needed even for the most hard headed pup.

5. Never use the beep to train the dog for anything as it is the same sound the collar makes when low on batteries.

6. Be aware that although the negative reinforcement form these collars is effective and very handy it does not replace positive reinforcement which should be your primary training tool.

7. The remote uses two 6 volt batteries for a total of 12v but it runs great on 9 volts as well. If you are handy with a dremel you can use this to your advantage. I modified mine so I can use a standard 9 volt battery in the back. It not only lasts a lot longer but you can get then for 50 cents from the dollar store instead of the expensive batteries that die fast. Warning/Disclaimer: not only will this void any chance of warranty or return but if you are not confident in your handyman skills you should skip this tip or you may destroy the remote. It is also best if you know how to solder because you can put on a 9 volt adapter cable but I just shove mine in there against the contacts because I didn't have a cord around the house to solder in.

Want ATC New LCD Remote Shock/Vibrate Dog Training Collar -2 Dog Discount?

Shock, vibrate, sound or light. Take your pick. Pefect for any dog(s).

Only downside is the transmitter goes to sleep too soon (2 minutes?) so you have to keep it awake by punching a button. Collars have movement sensors for this, too bad the transmitter doesn't.

Also, you can control only one dog at a time. So in an emergency you might have one more click to alert the right dog.